1. Pre press your garment for 10 seconds, this will remove any excess moisture within the garment.

2. Press the design for 10 seconds at 150-160 Degrees Celsius with heavy pressure.

3. After the first press, quickly peel away the transfer film from the garment.

PRO TIP:

• If your design features fine detail, you can wipe the transfer with a micro fibre cloth quickly before peeling

• Make sure to peel the transfer away quickly when freshly pressed

4. Place a Teflon sheet over the design and press again for another 10 seconds, this will make sure your transfer is fully adhered to the garment